Our most recent Autonomous vehicle engineering project, Steel E-Motive, was designed to unveil and meet the challenges of future autonomous vehicles.| AHSS Guidelines
Using Life Cycle Assessment, Mobility as a Service (MaaS) mobility solutions like WorldAutoSteel’s flaghip Steel E-Motive (SEM) program have the potential to contribute to a reduction in GHG emissions, helping to achieve these global targets and specific policy objectives.| AHSS Guidelines
Steels with a fully martensitic microstructure are associated with the highest tensile strength – grades with a tensile strength of 2000 MPa is commercially available, and higher strength levels are under development.| AHSS Guidelines
Springback correction can take many forms. The first approach is to apply an additional process that changes the elastic stresses to a less damaging form. One example is a post-stretch operation that reduces sidewall curl by changing the tensile-to-compressive elastic stress gradient through the thickness of the sidewall to all tensile elastic stresses though the thickness.| AHSS Guidelines
AHSS products have significantly different forming characteristics and these challenge conventional mechanical and hydraulic presses. The dramatically higher strength of these new steels result in higher forming loads and increased springback.| AHSS Guidelines