Selecting the right PCB laminates and materials for your design is very important as it can impact the overall performance of the board.| Sierra Circuits
FR4 materials are widely used due to their cost-effectiveness, wide range of operating temperatures, and excellent thermal properties.| Sierra Circuits
The IPC-2152 standard helps you optimize the current capacity, temperature rise, and width of a trace for efficient thermal management.| Sierra Circuits
A multilayer PCB has more than two layers in its stack-up. The stack-up describes the construction of a multilayer board in sequential order.| Sierra Circuits
High voltage circuit boards require accurate layout since the traces carry hazardous voltages. Read more now!| Sierra Circuits
Download the Connector Design Guide which helps you select the right connector and covers terminology, selection and layout rules, and more.| Sierra Circuits
Embedded PCB components are passive devices fabricated within the PCB substrate. They reduce parasitic effects and enhance heat dissipation.| Sierra Circuits
When designing a power electronics PCB, pick high thermal conductivity materials, integrate protection devices, and adhere to IPC standards.| Sierra Circuits
Parasitic capacitance effect in PCBs results in EMI and crosstalk. It can be reduced by following good layout practices.| Sierra Circuits
EMI can be mitigated by incorporating efficient grounding techniques and optimum trace spacing. This also ensures EMC.| Sierra Circuits