The problem of treating a set of local area networks (LANs) as one Internet network has generated some interest and concern. It is inappropriate to give each LAN within an site a distinct Internet network number. It is desirable to hide the details of the interconnections between the LANs within an site from people, gateways, and hosts outside the site. The question arises on how to best do this, and even how to do it at all. In RFC-917 Jeffery Mogul makes a case for the use of "explicit subn...| IETF Datatracker
This memo discusses subnets and proposes procedures for the use of subnets, including approaches to solving the problems that arise, particularly that of routing. A subnet of an Internet network is a logically visible sub-section of a single Internet network. For administrative or technical reasons, many organizations have chosen to divide one Internet network into several subnets, instead of acquiring a set of Internet network numbers. This RFC suggests a proposed protocol for the ARPA-Inter...| IETF Datatracker
This RFC suggests a method for workstations to dynamically find their protocol address (e.g., their Internet Address), when they know only their hardware address (e.g., their attached physical network address). This RFC specifies a proposed protocol for the ARPA Internet community, and requests discussion and suggestions for improvements.| IETF Datatracker
This memo discusses the utility of "subnets" of Internet networks, which are logically visible sub-sections of a single Internet network. For administrative or technical reasons, many organizations have chosen to divide one Internet network into several subnets, instead of acquiring a set of Internet network numbers. This memo specifies procedures for the use of subnets. These procedures are for hosts (e.g., workstations). The procedures used in and between subnet gateways are not fully descr...| IETF Datatracker
Internet Control Message Protocol (RFC 792, )| IETF Datatracker
Internet Protocol (RFC 791, )| IETF Datatracker
This RFC describes an IP/UDP bootstrap protocol (BOOTP) which allows a diskless client machine to discover its own IP address, the address of a server host, and the name of a file to be loaded into memory and executed. The bootstrap operation can be thought of as consisting of TWO PHASES. This RFC describes the first phase, which could be labeled `address determination and bootfile selection'. After this address and filename information is obtained, control passes to the second phase of the b...| IETF Datatracker