For the next post in my series about upgrading my Chumby 8’s Linux kernel (here are links to parts 1, 2, and 3), I thought I’d look at what was involved in getting the reboot and poweroff commands working properly. I noticed pretty early during the development process that they didn’t work, which was pretty annoying.| Downtown Doug Brown
This is the next post in my series about upgrading my old Chumby 8’s kernel. Here are links to part 1 and part 2 if you missed them. As a quick summary, I got U-Boot working in part 1 and then got the SD card working in part 2. In this part I’ll describe the complicated process of how I got Wi-Fi working.| Downtown Doug Brown
In the previous post in this series (here are links to parts 1, 2, 3, 4, and 5), I really got the Chumby to start looking like a Chumby. The display was alive! But getting the LCD controller working was really only one puzzle piece when it came to the display. The backlight needed more work so that I could control the brightness, and the touchscreen controller is a completely nonstandard design that is specific to the Chumby.| Downtown Doug Brown
This is a continuation of my previous post about upgrading the old 2.6.28 Linux kernel that came with my Chumby 8. In that post, I got a modern U-Boot working with SD card support, which is what I needed in order to boot Linux.| Downtown Doug Brown
As I mentioned in my last post, I spent a good chunk of my spare time over the past 6 months working on a project I’ve been thinking about for over a decade. I bought a Chumby 8 in 2011. It’s an 8″ touchscreen device powered by the Marvell PXA166 processor. It is essentially a souped-up digital picture frame with extra capabilities like speakers, a microphone, and Wi-Fi. There are a bunch of little Flash-based “apps” you can install for stuff like pictures, music, sports scores, wea...| Downtown Doug Brown