For the next post in my series about upgrading my Chumby 8’s Linux kernel (here are links to parts 1, 2, and 3), I thought I’d look at what was involved in getting the reboot and poweroff commands working properly. I noticed pretty early during the development process that they didn’t work, which was pretty annoying.| Downtown Doug Brown
This is the next post in my series about upgrading my old Chumby 8’s kernel. Here are links to part 1 and part 2 if you missed them. As a quick summary, I got U-Boot working in part 1 and then got the SD card working in part 2. In this part I’ll describe the complicated process of how I got Wi-Fi working.| Downtown Doug Brown
After getting the PWM backlight working in my last post (here are links to parts 1, 2, 3, 4, 5, and 6), there was only one piece remaining for having a fully functional display in my Chumby 8: the touchscreen controller. The display output worked perfectly fine but I couldn’t detect presses on it.| Downtown Doug Brown
At this point in my Chumby kernel upgrade project (parts 1, 2, 3, and 4 here), I had made a ton of progress but there wasn’t really much to show for it because I didn’t have the LCD working. Even though I had put a ton of work into the project, the display was still black. I knew it was time to get it working.| Downtown Doug Brown
This is a continuation of my previous post about upgrading the old 2.6.28 Linux kernel that came with my Chumby 8. In that post, I got a modern U-Boot working with SD card support, which is what I needed in order to boot Linux.| Downtown Doug Brown
As I mentioned in my last post, I spent a good chunk of my spare time over the past 6 months working on a project I’ve been thinking about for over a decade. I bought a Chumby 8 in 2011. It’s an 8″ touchscreen device powered by the Marvell PXA166 processor. It is essentially a souped-up digital picture frame with extra capabilities like speakers, a microphone, and Wi-Fi. There are a bunch of little Flash-based “apps” you can install for stuff like pictures, music, sports scores, wea...| Downtown Doug Brown