Nodes use IPv6 stateless address autoconfiguration to generate addresses using a combination of locally available information and information advertised by routers. Addresses are formed by combining network prefixes with an interface identifier. On an interface that contains an embedded IEEE Identifier, the interface identifier is typically derived from it. On other interface types, the interface identifier is generated through other means, for example, via random number generation. This docu...| IETF Datatracker
This document describes a protocol for Network Address Translator (NAT) traversal for UDP-based communication. This protocol is called Interactive Connectivity Establishment (ICE). ICE makes use of the Session Traversal Utilities for NAT (STUN) protocol and its extension, Traversal Using Relay NAT (TURN). This document obsoletes RFC 5245.| IETF Datatracker
This document describes the Dynamic Host Configuration Protocol for IPv6 (DHCPv6): an extensible mechanism for configuring nodes with network configuration parameters, IP addresses, and prefixes. Parameters can be provided statelessly, or in combination with stateful assignment of one or more IPv6 addresses and/or IPv6 prefixes. DHCPv6 can operate either in place of or in addition to stateless address autoconfiguration (SLAAC). This document updates the text from RFC 3315 (the original DHCPv6...| IETF Datatracker