Exploring Kubernetes Operator Pattern
What is Kubernetes Operator? Kubernetes API design. Kubernetes Custom Resources and CRDs explained.| iximiuz.com
What is Kubernetes Operator? Kubernetes API design. Kubernetes Custom Resources and CRDs explained.| iximiuz.com
This page contains a list of commonly used kubectl commands and flags. Note:These instructions are for Kubernetes v1.33. To check the version, use the kubectl version command. Kubectl autocomplete BASH source <(kubectl completion bash) # set up autocomplete in bash into the current shell, bash-completion package should be installed first. echo "source <(kubectl completion bash)" >> ~/.bashrc # add autocomplete permanently to your bash shell. You can also use a shorthand alias for kubectl that...| Kubernetes
In robotics and automation, a control loop is a non-terminating loop that regulates the state of a system. Here is one example of a control loop: a thermostat in a room. When you set the temperature, that's telling the thermostat about your desired state. The actual room temperature is the current state. The thermostat acts to bring the current state closer to the desired state, by turning equipment on or off.| Kubernetes
The Kubernetes API is a resource-based (RESTful) programmatic interface provided via HTTP. It supports retrieving, creating, updating, and deleting primary resources via the standard HTTP verbs (POST, PUT, PATCH, DELETE, GET). For some resources, the API includes additional subresources that allow fine-grained authorization (such as separate views for Pod details and log retrievals), and can accept and serve those resources in different representations for convenience or efficiency. Kubernete...| Kubernetes
The kubectl command-line tool supports several different ways to create and manage Kubernetes objects. This document provides an overview of the different approaches. Read the Kubectl book for details of managing objects by Kubectl. Management techniques Warning:A Kubernetes object should be managed using only one technique. Mixing and matching techniques for the same object results in undefined behavior. Management technique Operates on Recommended environment Supported writers Learning curv...| Kubernetes
You can use Kubernetes annotations to attach arbitrary non-identifying metadata to objects. Clients such as tools and libraries can retrieve this metadata. Attaching metadata to objects You can use either labels or annotations to attach metadata to Kubernetes objects. Labels can be used to select objects and to find collections of objects that satisfy certain conditions. In contrast, annotations are not used to identify and select objects. The metadata in an annotation can be small or large, ...| Kubernetes
FEATURE STATE: Kubernetes v1.22 [stable] (enabled by default: true) Kubernetes supports multiple appliers collaborating to manage the fields of a single object. Server-Side Apply provides an optional mechanism for your cluster's control plane to track changes to an object's fields. At the level of a specific resource, Server-Side Apply records and tracks information about control over the fields of that object. Server-Side Apply helps users and controllers manage their resources through decla...| Kubernetes
Finalizers are namespaced keys that tell Kubernetes to wait until specific conditions are met before it fully deletes resources marked for deletion. Finalizers alert controllers to clean up resources the deleted object owned. When you tell Kubernetes to delete an object that has finalizers specified for it, the Kubernetes API marks the object for deletion by populating .metadata.deletionTimestamp, and returns a 202 status code (HTTP "Accepted"). The target object remains in a terminating stat...| Kubernetes
A ConfigMap is an API object used to store non-confidential data in key-value pairs. Pods can consume ConfigMaps as environment variables, command-line arguments, or as configuration files in a volume. A ConfigMap allows you to decouple environment-specific configuration from your container images, so that your applications are easily portable. Caution:ConfigMap does not provide secrecy or encryption. If the data you want to store are confidential, use a Secret rather than a ConfigMap, or use...| Kubernetes
Each object in your cluster has a Name that is unique for that type of resource. Every Kubernetes object also has a UID that is unique across your whole cluster. For example, you can only have one Pod named myapp-1234 within the same namespace, but you can have one Pod and one Deployment that are each named myapp-1234. For non-unique user-provided attributes, Kubernetes provides labels and annotations. Names A client-provided string that refers to an object in a resource URL, such as /api/v1/...| Kubernetes
ENOSUCHBLOG| blog.yossarian.net
Every node in a Kubernetes cluster runs a kube-proxy (unless you have deployed your own alternative component in place of kube-proxy). The kube-proxy component is responsible for implementing a virtual IP mechanism for Services of type other than ExternalName. Each instance of kube-proxy watches the Kubernetes control plane for the addition and removal of Service and EndpointSlice objects. For each Service, kube-proxy calls appropriate APIs (depending on the kube-proxy mode) to configure the ...| Kubernetes
In Kubernetes, namespaces provide a mechanism for isolating groups of resources within a single cluster. Names of resources need to be unique within a namespace, but not across namespaces. Namespace-based scoping is applicable only for namespaced objects (e.g. Deployments, Services, etc.) and not for cluster-wide objects (e.g. StorageClass, Nodes, PersistentVolumes, etc.). When to Use Multiple Namespaces Namespaces are intended for use in environments with many users spread across multiple te...| Kubernetes
Kubernetes runs your workload by placing containers into Pods to run on Nodes. A node may be a virtual or physical machine, depending on the cluster. Each node is managed by the control plane and contains the services necessary to run Pods. Typically you have several nodes in a cluster; in a learning or resource-limited environment, you might have only one node. The components on a node include the kubelet, a container runtime, and the kube-proxy.| Kubernetes
In Kubernetes, some objects are owners of other objects. For example, a ReplicaSet is the owner of a set of Pods. These owned objects are dependents of their owner. Ownership is different from the labels and selectors mechanism that some resources also use. For example, consider a Service that creates EndpointSlice objects. The Service uses labels to allow the control plane to determine which EndpointSlice objects are used for that Service.| Kubernetes
Production-Grade Container Orchestration| Kubernetes
When you specify a Pod, you can optionally specify how much of each resource a container needs. The most common resources to specify are CPU and memory (RAM); there are others. When you specify the resource request for containers in a Pod, the kube-scheduler uses this information to decide which node to place the Pod on. When you specify a resource limit for a container, the kubelet enforces those limits so that the running container is not allowed to use more of that resource than the limit ...| Kubernetes
Labels are key/value pairs that are attached to objects such as Pods. Labels are intended to be used to specify identifying attributes of objects that are meaningful and relevant to users, but do not directly imply semantics to the core system. Labels can be used to organize and to select subsets of objects. Labels can be attached to objects at creation time and subsequently added and modified at any time.| Kubernetes
Role-based access control (RBAC) is a method of regulating access to computer or network resources based on the roles of individual users within your organization. RBAC authorization uses the rbac.authorization.k8s.io API group to drive authorization decisions, allowing you to dynamically configure policies through the Kubernetes API. To enable RBAC, start the API server with the --authorization-config flag set to a file that includes the RBAC authorizer; for example: apiVersion: apiserver.| Kubernetes
Custom resources are extensions of the Kubernetes API. This page discusses when to add a custom resource to your Kubernetes cluster and when to use a standalone service. It describes the two methods for adding custom resources and how to choose between them. Custom resources A resource is an endpoint in the Kubernetes API that stores a collection of API objects of a certain kind; for example, the built-in pods resource contains a collection of Pod objects.| Kubernetes
Expose an application running in your cluster behind a single outward-facing endpoint, even when the workload is split across multiple backends.| Kubernetes
