In this tutorial we are going to interface DS3231 RTC module with STM32 Blue Pill Board on LCD Display. We have seen many tutorials earlier for interfacing RTC DS1307 with Arduino , ESP32 boards, PIC microcontroller using Proteus Simulation tools. Related post: How to Control LED Brightness with PWM on STM32 BluePill? STM32 Blue Pill vs. Other STM32 Boards:| Electronics - Microcontrollers - Tutorials and Projects
In this tutorial we will interface real hardware of RTC DS1307 with STM32 Blue Pill Board.We have seen many tutorials earlier for interfacing RTC DS1307 with Arduino, ESP32 boards, PIC microcontroller using Proteus Simulation tools. Related post: RTC DS1307 AT24C32 Real Time Clock module with Battery. Arduino DS1307RTC and SSD1306 OLED display in Proteus [PIC16F877A]:| Electronics - Microcontrollers - Tutorials and Projects
In this tutorial, we will discuss about the different GPIO modes in STM32 microcontrollers. We will explain how each mode works, when to use them,| Electronics - Microcontrollers - Tutorials and Projects
In this tutorial, we will learn how to connect an STM32 microcontroller to a 16x2 LCD display with I2C device (PCF8574) and use the STM32 LCD library in this project. We start with simple introducing the 16x2 LCD display, then we will show how to set up the STM32 LCD library, and finally test it| Electronics - Microcontrollers - Tutorials and Projects
In this project, we will learn how to interface an STM32 Blue Pill with Proteus software. We will see a simple setup with program on Proteus window and we will see how to blink led continuously using Proteus software with STM32 Blue Pill board. Related posts: STM32 Blue Pill vs. Other STM32 Boards: A Comparison Getting| Electronics - Microcontrollers - Tutorials and Projects
In this tutorial, we will interface the MPU6050 Accelerometer and Gyroscope module and SSD1306 OLED display to monitor the values Using STM32-Blue Pill Board.| Electronics - Microcontrollers - Tutorials and Projects
In this tutorial, we will learn how to interface SSD1306 OLED Display with an STM32 board using/without using the STM32CubeIDE and HAL libraries| Electronics - Microcontrollers - Tutorials and Projects
This tutorial we will learn how to build a temperature meter and relative humidity measurement by using the STM32 Blue Pill Microcontroller and DHT11 Sensors where measured values of temperature and humidity are displayed on the screen SSD1036 OLED 128×64. Related Posts: STM32 Blue Pill vs. Other STM32 Boards: A Comparison Getting Started with STM32 Blue Pill Using Arduino IDE Getting Started with STM32F103| Electronics - Microcontrollers - Tutorials and Projects
we will be interfacing the 16X2 LCD display with the STM16 blue pill microcontroller. we will be interfacing the 16X2 LCD display with the STM16 blue pill.| Electronics - Microcontrollers - Tutorials and Projects