A 3D-printed 12-bay ATX NAS Case? Yes, please! - briancmoses.com
I 3D-printed 12-drive ATX case to use as a secondary Proxmox node in my homelab! It turned out fantastic!| blog.briancmoses.com
I 3D-printed 12-drive ATX case to use as a secondary Proxmox node in my homelab! It turned out fantastic!| blog.briancmoses.com
Brian reviews a pocket-sized NAS with an Intel N100 CPU, dual 2.5GbE networking, and room for four M.2 NVMe SSDs.| blog.briancmoses.com
I share what I like and what I dislike about the SilverStone Technology CS382 case after using it for 6 months.| blog.briancmoses.com
A diminuitive, TrueNAS SCALE machine featuring: 92TB of storage (90TB of HDD, 2TB of SSD), an Intel N100 CPU, 32GB of DDR5 RAM, and 10Gbps networking for under $1,750!| blog.briancmoses.com
A two-for-one DIY NAS build blog! I detail the components that I would pick for 2024's DIY NAS and EconoNAS builds. Which one will be your favorite?| briancmoses.com
I outgrew the case for my DIY NAS, the MK735, and to replace it, I had to buy three products: a Silverstone Technology CS382, an Icy Dock Express Cage MB038SP, and an Icy Dock ToughArmor MB411SPO-2B. I’ll share my review of all three products and talk about the outcome of this upgrade.| blog.briancmoses.com
I reached out to a creator of 3D-printable computer cases, makerunit, to ask if he was interested in designing a 3D-printed NAS case. And before I knew it, he designed two fantastic DIY NAS cases!| blog.briancmoses.com
Increasing the capacity of my NAS by 3D-Designing and 3D-printing a drive caddy for 4x 2.5" SSDs. Is an all flash DIY NAS in my future?| blog.briancmoses.com
