I have a Dell R710 rev. II that I use in my home office lab homelab running ESXi 6.5. The R710 sits in my office where we work from home. Normally the hum of the R710 fans isn’t terribly bothersome - the 5 fans it houses run at around 3,800 RPM each. The noise is definitely noticeable so I did a little bit of digging into ways I could quiet it down. After looking into replacing the fans with quieter ones I found that I could override the system control of the fans and silence them that way....| Chris Bergerons Tech Blog
On platforms that support it Petitboot can interact with the inband IPMI interface to pull information from the BMC. One particularly useful example of this is the "Get System Boot Options" command which we use to implement boot "overrides". By setting parameter 5 of the command a user can remotely force Petitboot to boot from only one class of device or disable autoboot completely. This is great for automation or debug purposes, but since it can only specify device types like "disk" or "netw...| sthbrx.github.io
In POWER land IPMI is mostly known as the method to access the machine's console and start interacting with Petitboot. However it also has a plethora of other features, handily described in the 600ish page IPMI specification (which you can go read yourself).| sthbrx.github.io