I 3D-printed 12-drive ATX case to use as a secondary Proxmox node in my homelab! It turned out fantastic!| blog.briancmoses.com
Major upgrades to my telescope's upper assembly - adding a Strock-style spider, filter slide system, crayford focuser, and 3D-printed 1:10 reducer| Lucas Sifoni
3D printable XYZ platform with 40mm+ travel using only M4 hardware - tested design for Bath interferometers with coarse/fine motion capabilities| Lucas Sifoni
Playing around with the first hardware product from PostHog.| Tim Broddin
The XBOX 360 controllers are objectively the best controllers. And the wireless ones are nice because I don’t need to run wires for couch gaming. Even though they are becoming harder to find and I usually buy them used on Ebay, I care a lot for them. But what I don’t care for, are the included battery holders. They need… Read More →| CHRZ Engineering
When I built the DIY NAS: 2025 Edition, I knew I was going to have an issue because I was out of 10Gb ports on QNAP QSW-308S switch and I needed at least one more to test the new NAS. I used this new NAS as an excuse to buy a MikroTik CRS309-1G-8S+ (specs) and upgrade my 10Gb networking by another 5 ports.| blog.briancmoses.com
I reached out to a creator of 3D-printable computer cases, makerunit, to ask if he was interested in designing a 3D-printed NAS case. And before I knew it, he designed two fantastic DIY NAS cases!| blog.briancmoses.com
My two 3D printer arrangement didn't quite work out because the Prusa MK3 couldn't keep up with my Bambu Labs X1C Combo. I solved this problem by buying another Bambu Labs 3D printer!| blog.briancmoses.com
Increasing the capacity of my NAS by 3D-Designing and 3D-printing a drive caddy for 4x 2.5" SSDs. Is an all flash DIY NAS in my future?| blog.briancmoses.com
In 2018, I bought my first and only 3D-printer: The Anet “Firestarter” A8 DIY kit. A few months later, I wrote a post about what upgrades and modifications I did to this printer (No more firestarter). Now, in 2022, I once again upgraded this printer. Like the Ship of Theseus, at what point does it stop being the original printer?… Read More →| CHRZ Engineering