What’s The Best Type Of Wood For A Utility Trailer Floor?
A utility trailer is only as strong as the materials used to make it. But, what type of wood is strong enough for a utility trailer floor?| The Woodwork Place
A utility trailer is only as strong as the materials used to make it. But, what type of wood is strong enough for a utility trailer floor?| The Woodwork Place
Different types of wood can burn hotter and more brightly than others. But, can Redwood burn both cleanly and hot enough to heat up your home?| The Woodwork Place
Aspen is classed as a hardwood, which can making it great for carving. But is it the right choice for you? Keep reading to find out…| The Woodwork Place
You should ideally carve with wood that won’t split as you work with it. So, what does this mean for carving with a wood type such as Douglas Fir?| The Woodwork Place
Picking out a great smoking wood is tricky. But, why is Mango wood never recommended as a wood choice for smoking meat?| The Woodwork Place
The chemicals used on treated wood can be too toxic to have around rabbits. So, what alternative wood treatments can you use instead?| The Woodwork Place
Once well-dried MDF boards have been sealed, they are safe to have inside your home. But, what does this mean for your rabbits safety?| The Woodwork Place
Varnish does better at preventing scratches and abrasions on the surface of wood. But is that really a good enough reason to choose varnish over Teak oil?| The Woodwork Place
A few brands claim that their wood glue is stainable, but can you really stain over wood glue?| The Woodwork Place
Poplar wood is a poor choice for exterior construction. Even a waterproof sealant won’t suddenly make this lumber weather resistant. And here’s why…| The Woodwork Place
Is Acacia wood a good choice for firewood? Or would it be a costly mistake to throw this pricey hardwood onto that log fire?| The Woodwork Place
Using good clean burning firewood in your fireplace, is one thing. But, not all types of wood will produce enough heat to warm up your home…| The Woodwork Place
When we pit these two against each other, who will win in the battle between Poplar vs Mahogany wood?| The Woodwork Place
Sugar Maple is better known for giving us great tasting Maple Syrup. But, who says that this tree can’t also be a great source of firewood?| The Woodwork Place
If you are looking for affordable fuel for your home, then using an abundant clean burning wood in your fireplace is a great way to save money.| The Woodwork Place
Olive wood can be used to make bowls, spoons and spatulas. But, how does Olive wood stack up as a food safe cutting board?| The Woodwork Place
Outdoor furniture needs to be made from naturally rot-resistant timber. So, where does that leave Maple wood?| The Woodwork Place
As Rosewood becomes ever more difficult to source, Purpleheart has started to rise in popularity as an alternative for guitar fretboards.| The Woodwork Place
You only need 3 types of woodworking clamps; Bar, Strap, and Pipe Clamps. Keep reading to discover why…| The Woodwork Place
Basswood is well-known for being a bit of a nightmare to stain and/or finish. So, how do you go about applying a finish onto Basswood?| The Woodwork Place
Whether you’re fantastic at pyrography — or a complete beginner — when it comes to this art-form you should always make personal safety a priority…| The Woodwork Place
When it comes to the art of wood burning, you should always put safety first.| The Woodwork Place
Whether you’re new to wood burning — or you are a dab hand at this art — you’ll always need a great canvas for your designs…| The Woodwork Place
Is Poplar really the best wood for carving? Or does it only get recommended because its so cheap? Keep reading to find out…| The Woodwork Place
We’ve found 7 fiendishly clever wooden signs you can make and hang up this Halloween. Keep reading to find out more…| The Woodwork Place
Click here to learn how to make a last-minute Halloween display that’ll be one to remember!| The Woodwork Place
Sealing wood, (especially wood that has just had a Pyrography design burned into it), is the best way to give your work a natural and durable finish…| The Woodwork Place
Orange fretboard oil can rehydrate timber just as well as any speciality lemon oil. But, are these oils also right for your own guitars fretboard?| The Woodwork Place
What makes these two oils so very different? And what alternative oils can you use (because hint: neither one of these oils is your best option)…| The Woodwork Place
Fretboard oils act like a moisturizer for wood, and can prevent your fretboard from cracking. But, is lemon oil the only thing you can use on your guitar?| The Woodwork Place
Walnut wood is a richly brown hardwood that makes for incredibly eye-catching furniture. But, can it also make for an eye-catching pyrography canvas?| The Woodwork Place
Here’s everything you need to know about applying Tru-oil onto that maple fretboard.| The Woodwork Place
Your choice of wood can mean the difference between smoky deliciousness and bitter disappointment. So, what can you expect to get from smoking Cherry wood?| The Woodwork Place
Polyurethane is an easy finish to use. It seals, waterproofs, and protects most any type of wood. But will it work just as well on Poplar?| The Woodwork Place
To be perfectly honest, very little differentiates these two fantastic hard wax oil finishes. So, what key factor genuinely separates the two?| The Woodwork Place
Removing wax is pretty straightforward, and there’s little stopping you from scraping off a wood wax finish. But, what about hard wax oil finishes?| The Woodwork Place
Rubberwood isn’t the first thing that comes to mind when you think of a rustic countertop. Yet, how does it compared with Birch wood?| The Woodwork Place
Acacia wood is fast-rising as a great option for a long-lasting countertop. But, what is it about Acacia that makes it the right choice for your kitchen?| The Woodwork Place
There are unique characteristics to certain types of timber, that make the more durable and long-lasting. But, what makes Acacia wood so special?| The Woodwork Place
You don’t always need to add wood finish to a fretboard, but it’s wiser to do so than not. But, what kind of finish do you need on a rosewood fretboard?| The Woodwork Place
There’s a world of choice when it comes to carving woods. So, what could make you choose a timber such as Hackberry wood?| The Woodwork Place
Want to try your hand at carving, but not sure what type of wood you should use?| The Woodwork Place
Woodcarving with Alder wood lumber can sometimes turn out to be a little tricky…| The Woodwork Place
If your particular piece of cherry lumber isn’t as dark as you’d like, how do you darken cherry wood?| The Woodwork Place
A half-decent wood filler is your best chance at fixing those problem cracks and crevasses. But, can polyurethane fill in cracks in a wood table?| The Woodwork Place
Discover the two key things you must do before you apply any type of paint over Polycrylic…| The Woodwork Place
Natural shellac is so waxy that it’s almost impossible for any wood finish to stick it. But can a lacquer finish be put onto a shellac coat all the same?| The Woodwork Place
When it comes to finishes such as lacquer, mineral spirits can easily thin them out. But, can mineral spirits also dissolve away shellac?| The Woodwork Place
Have you ever wondered why your guitar fretboard feels so sticky? Well, the good news is that you can do something about it…| The Woodwork Place
When it comes to indoor furniture and shelving, is OSB really safe to have around your home?| The Woodwork Place
Ever noticed polyurethane feels rough or grainy? It’s not just your imagination. So let me explain why wood feels rough after a polyurethane coat…| The Woodwork Place
What happens when your glossy polyurethane finish turns out shinier than advertised?| The Woodwork Place
What happens when a clear coat stays sticky and that polyurethane is not drying?| The Woodwork Place
Sanding helps smooth out imperfections so that a top coat leaves behind a nice finish. But what happens when sandpaper leaves wood feeling fuzzy?| The Woodwork Place
Polyurethane doesn’t attract dust, yet still this long-lasting finish can end up looking like a dust magnet…| The Woodwork Place
Outdoor furniture needs to be made from strong, weather-resistant timber. And while Hickory may be strong, it is far from weather-resistant…| The Woodwork Place
With all of the different types of fillers on the market, what wood fillers can you screw into?| The Woodwork Place
Epoxy can be applied over polyurethane. But will an epoxy top coat help or hinder your polyurethane finish?| The Woodwork Place
Wood wax works best when used as a final top coat. So, if you’ve already coated your craft with glossy shellac, will wax stay in place on top of it?| The Woodwork Place
Shellac is pretty versatile stuff. But, shellac has a bit of a reputation for having adhesion problems. So, can we rely on shellac to seal a coat of paint?| The Woodwork Place
If you want a truly durable Polycrylic finish, should you top coat it with polyurethane?| The Woodwork Place
Discover what makes Polycrylic stand apart from other water-based finishes. And find out if Polycrylic is durable enough for the great outdoors.| The Woodwork Place
Learn what really makes a wood finish food safe — and whether or not Polycrylic fits the bill…| The Woodwork Place
A kitchen countertop needs a durable sealer that can shrug of water spills, scratches, and the heat of a hot pan. But, is Polycrylic one such sealer?| The Woodwork Place
There are two main reasons why shellac bubbles: it either dried too quickly and/or it was applied too thickly. So, what can you do to fix it?| The Woodwork Place
Find out which preparatory steps will prevent those bubbles from marring that final Polycrylic coat.| The Woodwork Place
Making a fantastic looking cutting board is one thing. But, making sure that the wood you’re using is right for food prep, is quite the other.| The Woodwork Place
Not all wood finishes pair well with food prepping surfaces. But, is lacquer one such type of finish?| The Woodwork Place
A coat of paint can seem like a quick and easy way to give a bamboo cutting board some amazing color…| The Woodwork Place
Tung oil is easy to apply, and leaves behind a beautiful finish. But, how does it stack up when it comes to being food safe?| The Woodwork Place
Find out why that slow-drying Tung oil finish is not the most practical way to maintain your cutting board…| The Woodwork Place
Tung oil can enhance the natural good look of Mango wood grain. But is it really your best choice for an oil finish?| The Woodwork Place
You’ve given it a few days, but that wood surface is still wet to the touch. So why is that danish oil finish not drying?| The Woodwork Place
Despite some adhesion and drying problems, you can still apply a clear varnish over an epoxy resin coat. Here’s how…| The Woodwork Place
Purpleheart woods color is its best feature. So, how can you finish purple heart wood without losing its vibrancy?| The Woodwork Place
Wipe-On Poly is made out of tougher stuff than Tru-oil. But is this popular wood finish really the best option for your instrument?| The Woodwork Place
There are plenty of wood finishes that look fantastic on tonewood. But, when it comes to Tru-oil vs Tung oil, which one’s better for your instrument?| The Woodwork Place
A twice yearly dab of oil is all that’s needed to keep fretboards in tip top condition. But, what happens if you add a touch too much oil?| The Woodwork Place
As a woodworking enthusiast, you already know by now that polyurethane is a fantastic water-resistant wood sealer…| The Woodwork Place
Polyurethane is a waterproofing wood finish. And when it comes to Maple, this is fantastic news…| The Woodwork Place
While you could mix acrylic paint with a water-based polyurethane, it isn’t best practice. But is mixing paint with polyurethane really such a bad idea?| The Woodwork Place
Wax is almost always used as a final top coating finish. But, could you maybe coat over wood wax with something like a lacquer?| The Woodwork Place
There are a range of oils you can use to clean a fretboard with. But what if your choice of oil comes down to deciding between lemon oil vs linseed oil?| The Woodwork Place
When it comes to waterproofing wood, is linseed oil alone going to be enough to prevent mold?| The Woodwork Place
So here’s a pretty random question; Why Are Carpenter Pencils Flat? Learn this and more by checking out The Woodwork Place NOW!| The Woodwork Place
If you want a truly even surface, can you use a router to finish those epoxy resin edges?| The Woodwork Place
If you want to make edge cuts that are smooth and level, then a router is the best tool for creating that perfect line every time.| The Woodwork Place
Deciding whether you need a Jointer and Planer actually depends on what kind of woodwork project you’re working on…| The Woodwork Place
Do you want a durable Axe throwing target that can handle all-weather?| The Woodwork Place
How-To Make Cricut Vinyl Stick to Wood (That Actually Stays Put!)| The Woodwork Place
Have you just thrown hours of work down the drain? Or is there a simple fix for teak oil not drying?| The Woodwork Place
When it comes to wood burning artwork, can Teak wood make for a fantastic pyrography canvas?| The Woodwork Place
Teak wood is resistant to decay, warping and cracking. But how does this tropical hardwood fair as a regular kitchen utensil?| The Woodwork Place
The best type of wood finish for a garden bed is one that won’t leach toxic chemicals into soil…| The Woodwork Place
A lot of popular paint products are very toxic. But, is there any sort of durable (yet guinea pig safe) paint out there?| The Woodwork Place
Wood stains work best when they’re applied onto clean dry timber. But, what makes mineral oil so great at cleaning wooden surfaces?| The Woodwork Place
Discover why a pure food grade wood finish is the only thing that should saturate the surface of your cutting board.| The Woodwork Place
Wood stains typically take around 12-24 hours to dry. But what if, after days have passed, that stain is still too tacky to seal with polyurethane?| The Woodwork Place
When it comes to a rot-resistant wood like Western Red Cedar, does it really need a polyurethane sealing coat?| The Woodwork Place
If your cedar siding has been installed properly, then caulking shouldn’t be an issue. So, when should you consider caulking that cedar siding?| The Woodwork Place
