For those finishers looking for an opportunity to grow their business in a new industry, AutoBeat Editor-In-Chief Gary Vasilash says the future of electric vehicle (EV) products — including battery cells — is growing enormously.| Finishing and Coating
The Michigan Chapter of NASF will be hosting a virtual Government Affairs Update and Outlook on Thursday, January 21 at 2:00 p.m. with the NASF's Christian Richter and Jeff Hannapel.| Finishing and Coating
Properly passivated stainless steel will not plate unless contacted by a plating part or the bath is not properly maintained.| Finishing and Coating
Kurt Weamer is Director of Sales and Marketing the Wolkerstorfer Co. in New Brighton, Minnesota, which provides metal finishing services, plating, painting and destructive/non-destructive testing for aerospace, military, and heavy industry.| Finishing and Coating
On December 10, 2020, the U.S. Environmental Protection Agency (EPA) announced the availability of a draft compliance guide that outlines which imported articles are covered by EPA’s July 2020 final significant new use rule (SNUR) that prohibits companies from manufacturing, importing, processing, or using certain long-chain per- and polyfluoroalkyl substances (PFAS) without prior EPA review and approval.| Finishing and Coating
In the ongoing fight against COVID-19, experts on microbiology and copper are recommending an expanded use of the metal to reduce the virus's spread. So might copper be incorporated into the construction of masks, the universally accepted virus-fighting personal item?| Finishing and Coating
For this 20 Questions segment, we went a little different and invited the owners of Bales Metal Surface Solutions — Sara and Stacey — to take part in this Q&A without seeing each other’s answers until they appear here.| Finishing and Coating
It may be a reach to say that the DECC Company in Grand Rapids, Michigan, saved rock and roll music, but stay with us on this one. Suffice to say, it was founder Evert Mellema’s ingenuity more than 56 years ago that kept many jukebox’s humming along, as well as dust and dirt free.| Finishing and Coating
Like her grandfather who started General Magnaplate almost 70 years ago, Ashley Saunders Russo is a bit of an entrepreneur herself.| Finishing and Coating
Adam Brumfield is the Director of Business and Product Development Roy Metal Finishing in Easley, South Carolina, one of the largest finishing operations in the U.S.| Finishing and Coating
Zinc flake coating is a generic term for coatings and is used by several chemical providers globally. Zinc flake, by design, will lay and overlap on the products when coated. This allows for a blend of zinc flakes to formulate a uniform coating coverage. This specific coating is relatively thin (8-12 µm) and will produce a high level of corrosion protection for any part.| Finishing and Coating
Meghan Bates is the Vice President at Luke Engineering in Wadsworth, Ohio, which specializes in anodizing and conversion coatings for the light metals of aluminum and magnesium.| Finishing and Coating
A walk through the sprawling 175,000-square-foot campus that is Durable Industrial Finishing Co. (DIFCO) in Tucker, Georgia, will tell you all that you need to know about how automated the operations are at this 60-year-old finishing operation.| Finishing and Coating
Milt Stevenson Jr. is Vice President and Chief Environmental Officer at Anoplate in Syracuse, New York, which he runs along with his brother, Jim. It was founded by their father in 1960 and operates in a 104,000-square-foot facility. Milt is an active member of the finishing industry and its association, and in 2019 was named an NASF Fellow for his life-long work and dedication to the industry.| Finishing and Coating
Duke Vo is Sales Manager at Temecula Quality Plating in Temecula, California, and previously served in the U.S. Army.| Finishing and Coating
For metal castings and powder metal parts exposed to harsh, high-pressure, or vacuum environments, holes and fissures are unavoidable.| Finishing and Coating
Staying engaged with its customers is important to Coventya USA, so during these pandemic times where travel is limited or restricted, the supplier to the finishing and coating industry has developed a program to improve the knowledge of its customers.| Finishing and Coating
Jaime Maliszewski is president and CEO of Reliable Plating Works and general manager of Elite Finishing in Milwaukee, a family-owned company that has been around since 1929. Not only does he lead one of the top industrial chrome plating shops in the U.S., but Maliszewski and his employees are actively involved in a number of community organizations.| Finishing and Coating
Traditionally, most chrome baths use lead anodes. When we think of lead anodes, we usually just think about the lead part, but in fact, the lead anodes that are used are never made of pure lead.| Finishing and Coating
Keith Eidschun is the owner of Freedom Metal Finishing in Clearwater, Florida, as well as co-owner of Analytical Specialties Incorporated. The shop was originally known as Dixie Plating and has been in business since 1944 across three generations. Eidschun has been the owner of the Nadcap shop since, which is when he changed the name to Freedom in 2009 to include their painting, silk screening, and powder coating capabilities.| Finishing and Coating
When you visit Allied Finishing in Grand Rapids, Michigan, you won’t find the owners of the company sitting in a corner office shuffling papers. Chances are you’ll need to venture to the shop floor to find either Brad Hirdes, Marc Hop, C.J. Nachtegall, or Jerry VanderSloot.| Finishing and Coating
Monique Guyse is a Senior Sales Perfectionist at Plateco, a third-generation shop based in Reedsburg, Wisconsin. She is responsible for sales, customer care and quality control. A graduate of the University of Wisconsin-Oshkosh, Monique started her Plateco career in the Accounts Receivable area, then moved into sales and operations, serving as sales engineer, technical sales engineer, and quality systems manager before being promoted to her current position.| Finishing and Coating
Covering the world of surface finishing and industrial coatings, including electroplating, plating, electrocoating, liquid coating, powder coating, mechanical f| FinishingandCoating.com